Step – 4: Check user manuals or other reference documents related to your hardware for the following information:Ībove properties are critical to make the communication correctly, if you don’t configure these properties properly then you will get either junk data or no data. Step – 3: Note down the “COM port number” as we will require it. If you are not aware about accessing device manager then follow this post.
Step – 2: Open device manager and check for COM ports, it get assigned a COM port or not.
Step – 1: Connect your device with your system through RS-232 cable or USB-to-Serial adapter and check whether it’s connected successfully or not. Now you have to follow below steps to communicate with your device: If you want to use Putty than download this file from here. If you want to use Hyper terminal than you have to download this file.
In Windows, serial port named as COM port.
This driver makes a virtual serial port in your system. If your system does not have any serial port, you can still use a USB-to-Serial adapter When you buy a USB-to-Serial port adapter you will get a driver for it as well. Putty is a great and free tool and available for both Windows and Linux platforms. How ever you can still use Hyper terminal in Windows 7 as well as you can use other freely available serial communication utilities like Putty. In the old days, Windows used to be provided Hyper terminal but now from Windows Vista they don’t provide such a tool, could not understand the reason though. If you are performing these tasks on either Windows or Linux then you will requires some program that can communicate with your hardware and system. Some times you need to access serial port of your PC/LAPTOP to perform some actions like if you want to connect a GSM modem or if you are an Embedded systems programmer then to access program or interface your micro-controllers to your system.
And last but not the least you don’t have to manually update this program because an improvement has been made for automatic update.Keywords: Serial port communication in Windows 7 using Hyper-terminal and Putty, Putty, Hyper terminal in Windows 7 Zmodem compatibility has been upgraded to suit the needs of the users of Dial-up modems and serial ports. Some of the new features that has been included in this new version are unlike the previous versions HyperTerminal private edition 7 can now use the SSH protocol to securely into a server or any other computer through a TCP/IP network. This program is compatible with most of the Windows operating system versions like Windows 2000, XP, Vista and Windows 7. This allows the host systems to get access to the user’s printer. Another important feature that must not be forgotten about is the pass-through printing option. You can set the program to automatically shut down after you log out. After you have finished talking with the person over the computer do not forget to log out. Allot password and user ID’s and host command to single key so that it becomes easy for you to communicate.
Through COM ports you can talk directly to various different systems. Use a Dial-up modem to dial into new aged systems. You need a TCP/IP network to connect to the systems on the internet or you can use Telnet or Secure Shell to do the same.Īfter that you have to input your area code or the pin code of your area according to which the program is going to set-up a connection. If you’re looking forward to use it then first, you need to have the minimum requirements on which the software is going to run. Hyper terminal private edition is a commercially acclaimed terminal emulator software that is capable of connecting to systems through TCP/IP networks, Dial-up modems, and COM ports.